Service Hotline:+86-0514-83289118


KN95 mask
KN95 mask
Product specifications: ear-hook type three-dimensional plane typeStructural composition: 1 layer of polypropylene (PP) ss non-woven fabric 50g, 2 layers of medical grade 99 meltblown fabric 25g, 3 layers of hot air cotton 40g; 4 layers of medical grade 99 meltblown fabric 25g; 5 layers of polypropy

Product specifications: ear-hook type three-dimensional plane type

Structural composition: 1 layer of polypropylene (PP) ss non-woven fabric 50g, 2 layers of medical grade 99 meltblown fabric 25g, 3 layers of hot air cotton 40g; 4 layers of medical grade 99 meltblown fabric 25g; 5 layers of polypropylene (PP) sss 35g of non-woven fabric.

Main material: PP, static electret PP

Scope of application: This standard applies to ordinary self-priming, filter-type respiratory protective equipment that protects against various types of particulate matter (including dust, smoke, fog, haze, microorganisms, etc.)

Storage environment: 1. Must be properly stored and away from contaminated areas; 2. Prevent mechanical extrusion, humidity, high temperature, sunlight exposure, and contact with corrosive chemicals; 3. It is recommended to store the product at a temperature of 0 ℃ ~ 50 ℃, relative humidity of 50% the following.

Validity: 2 years


image.pngimage.pngimage.pngimage.pngimage.pngimage.png



Product specifications: ear-hook type three-dimensional plane type

Structural composition: 1 layer of polypropylene (PP) ss non-woven fabric 50g, 2 layers of medical grade 99 meltblown fabric 25g, 3 layers of hot air cotton 40g; 4 layers of medical grade 99 meltblown fabric 25g; 5 layers of polypropylene (PP) sss 35g of non-woven fabric.

Main material: PP, static electret PP

Scope of application: This standard applies to ordinary self-priming, filter-type respiratory protective equipment that protects against various types of particulate matter (including dust, smoke, fog, haze, microorganisms, etc.)

Storage environment: 1. Must be properly stored and away from contaminated areas; 2. Prevent mechanical extrusion, humidity, high temperature, sunlight exposure, and contact with corrosive chemicals; 3. It is recommended to store the product at a temperature of 0 ℃ ~ 50 ℃, relative humidity of 50% the following.

Validity: 2 years


image.pngimage.pngimage.pngimage.pngimage.pngimage.png


Online
    Phone
Sweep plus WeChat